Water treatment system design is dictated by the impurities in the water source to be treated. Pure Choice offer specialist advice and equipment for the treatment of a problem water supply. It is very important to speak with us about the particular issue that you have with the water supply. For the correct water treatment system, please telephone us on 01458 860557.
Water treatment system solutions
We are happy to build a bespoke turnkey water treatment system. To arrive at the correct water treatment system solution we require a water analysis. From this water analysis we will then be able to specify the correct water treatment system equipment to suit the application.
Private water supplies
Private Water Supplies Regulations 2010; require water from springs, bore holes, surface water, well water, (and other sources) that is to be used for food preparation and Human consumption to meet certain parameters. A Water treatment system for correction of contaminates such as Bacteria (E. coli.), Arsenic, Iron, Manganese, Lead, Nitrate, Nitrite, Sediment, pH, Taste, Turbidity, Odour, Hydrogen Sulphide, and many more. Pure Choice will provide you with quality water treatment system, Contact us.
Here are just a small range of equipment that we can help you with for the correct water treatment system
Best dealt with normally with Ultra Violet water sterilisers. A UV water treatment system will render the bacteria sterile and unable to reproduce and multiply. Disinfection dosing systems can also be used as a method of bacteria control. For further information please see our page private water supplies E.coli bacteria treatment.
Iron, Manganese and Aluminium Removal
This process renders contaminants insoluble via the use of oxygen. The precipitate is then filtered and backwashed out from the system. The filter used is determined by the initial water analysis (please note that this method can be used to eliminate Hydrogen Sulphide).
Pesticide, Chlorine and Colour Removal
Used on systems where backwashing is appropriate, this method uses Granular Activated Carbon. The carbon either absorbs or converts the contaminants, depending upon their make up.
This process can be done either at point of entry, or at point of delivery (for drinking purposes). The process utilises an ion exchange similar to that used in a water softener bed.
Water with a pH value below 7 (acids) can cause corrosion. This can be addressed by using a high pressure vessel containing Dolomatic Limestone. The pH is raised to above 7, taking it into the neutral to alkaline range. This correction is often needed when Iron or Manganese removal is required.
Harnesses the action of low micron levels teamed with layered media beds. This works at high flows and other more specialist media may be needed to achieve better polishing results with certain waters.
This is an aero-separator system that oxygenates and degases water with a mixed filter bed. It corrects pH, removes turbidity and also removes many metals.
Air & Ozone Injection
This enhances the performance of Iron/Manganese units. It adds oxygen before the catalytic filter either from air drawn in through a venture, or from an ozone generator. It also helps to raise pH levels by gassing off Carbon Dioxide and reducing Hydrogen Sulphide, which gives off a bad taste.
Pure Choice have more than 20 years experience in this field of water treatment
Please contact us on 01458 860557